Test Signal Injectors
Picotest has introduced a new line of Signal Injectors that enable “hi-resolution” voltage regulator and power supply measurements. Our line of Signal Injectors is the most versatile and sophisticated set of test adapters ever developed. They are an essential part of getting the most out of your network and impedance analyzers whether you are measuring power supplies, regulators, other linear circuitry or components. If you are making stability, step load, noise, PSRR, PDN, EMI, reverse transfer, crosstalk, impedance (power supplies, opamps, ESR, DCR, batteries), or DC Bias effect measurements (inductors, opto-couplers, diodes), then you need to be using Picotest Signal Injectors to get the most out of every measurement.
The Picotest line of Signal Injectors can be used with any manufacturer’s oscilloscope, network analyzer, or spectrum analyzer.
Anwendungsbeispiel von Einspeiseübertragern:
Messung des Regelkreisverhaltens von Netzgeräten (Bode-Plot)
Für die Sicherstellung der Stabilität von Spannungsreglern und Schaltnetzteilen ist das Regelkreisverhalten zu messen und zu charakterisieren. Ein Spannungsregler mit guter Kompensation sorgt für stabile Ausgangsspannungen und reduziert den Einfluss von Lastwechseln und Abweichungen in der Versorgungsspannung. Die Qualität dieses Regelkreises bestimmt die Stabilität und das Aussteuerverhalten des gesamten DC/DC-Wandlers.
Ein Einspeisetransformator wie der Picotest J2100A trennt in diesem Beispiel das AC-Verzerrungssignal ab und beseitigt jegliche DC-Vorspannung.
Anwendungsbeispiel: R&S Applikation – Bode Plot)
Schemat. Aufbau (Quelle: R&S Applik. Bode Plot)
J2100A 1 Hz – 5 MHz
J2101A 10 Hz – 45 MHz
Injection Transformers
• High quality, wide bandwidth, vastly superior to audio/video transformer solutions
• J2100A supports PFC regulators & most power supplies
• Supports 5 Ohm termination for minimum impact to loop
• 10Hz supports off-line power supplies
• 45MHz high enough for state of the art, high bandwidth regulators
• Low distortion for superior precision
J2110A DC-45MHz Solid State Voltage Injector
(Bode Box)
• DC-45MHz, supports high performance low noise wideband applications
• Low distortion for superior precision
• 25 Ohm insertion resistance
• 50 Ohm oscillator input
• < 3uA typical bias current
• >2 MΩ typical Input Resistance
• High PSRR Low Noise Regulator with Universal input
• Non-Mixing front end perfect for IMD injection
J2111A / J2112A DC-40MHz Solid State Current Injector
• High PSRR Low Noise Regulator with Universal input
• 20nSec typical rise and fall time
• DC-40MHz usable range (interconnection dependent)
• Two Quadrant Bipolar operation works with positive outputs (positive and negative outputs – J2111A only)
• Better than 1uA resolution
• Built in offset for use with Network Analyzer
• Precision current monitor with 50 Ohm output
• Works with Arbitrary Waveform Generators, Function Generators and Network Analyzers
• Low (100mA) and High Current (1A) versions
J2180A Preamplifier
• Provides a fixed, AC coupled 20dB gain while converting a 1 MOhm input impedance to a 50 Ohm output impedance
• With a 3dB bandwidth of 0.1Hz to 100MHz, the preamplifier improves the sensitivity of oscilloscopes, network analyzers and spectrum analyzers
• Works with all scopes, spectrum analyzers and VNAs
• Active DC bias loop maintains low DC output voltage
• High input impedance compatible with typical probes to minimize circuit loading
• Improves effective noise floor and spurious responses
Vertrieb und Distribution
PICOTEST Produkte werden vertrieben von Allice Messtechnik GmbH mit Sitz in Frankfurt. Hier erhalten Sie sowohl technischen Support als auch Unterstützung beim Einsatz der PICOTEST Produkte.
Lassen Sie sich ein Angebot zu tagesaktuellen Konditionen erstellen – oder rufen Sie einfach einen Messtechnik-Spezialisten an.